- Support 24 ports per 1U
- High performance EZ-Panels that supports all Category 6 connecting hardware performance specifications up to 250 MHz
- Conform to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E.
- Simple labor-saving termination using standard Krone and 110 termination tools
- Excellent provisions for terminating shielded cables
- Enhanced cable retention fixture
- Sealed casing for superior EMI/RFI protection for shielded model EZ-Panels
- Supports solid 22-24 AWG wires and stranded 24-26 AWG
- High durability and reliability
- Meets the transfer impedance standard requirement
GIRARD Cat.6 shielded EZ-Panels are part of the GIRARD Cat.6 EZ Cabling System, featuring Category 6 performance. The system is designed to Conforms to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E.
EZ-View��Capability
Cat.6 24-port EZ-Panels, when used in conjunction with GIRARD's EZ-View System, can scan the wiring center configuration and subsequently report the connectivity status.Patching information is displayed on the management station for cabling management and control.
LED indicators on EZ-Panels identify any two ports patched together. Extremely useful for facilitating maintenance in mid-to-large size wiring centers which are over congested with patch cords.
Computerized LED-display guides the technician in performing Moves, Adds & Changes (MAC).
Cat.6 24-port shielded EZ-Panels offer high quality patching solutions that are made to last. The robust EZ-Panels exceed all Category 6 connecting hardware requirements and fully integrate shielded cabling systems. Provides GIRARD's worldwide-recognized EZ-View� Technology with a real-time cabling management system.
The GIRARD Cat.6 shielded line of data communications EZ-Panels meets the requirements for high-performance Category 6 network components. The EZ-Panels conform to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E, and are designed for high-speed applications such as ATM 622 Mbps, Gigabit Ethernet 1000 Mbps and future high-speed applications.
The EZ-Panels are optimized for ease of assembly and termination. With simple labor-saving termination using standard Krone and 110 termination tools and color-coded wiring blocks, installation costs are significantly reduced. A unique assembly fixture is available for supporting the EZ-Panel during assembly.
Special Cat.6 shielded models, when used in conjunction with GIRARD's EZ-View system, are able to perform remote or on-site scanning of the patching configuration. The entire wiring center's patching configuration is continuously monitored by a scanner which reports the data to a remote terminal.
The network administrator uses this data as a vital part of his cabling management system. The data may be displayed on the EZ-Panel itself by LED indicators. Servicing time is dramatically reduced as computerized LED displays guide the technician when performing Moves, Adds and Changes (MACs).
Interface
Front Interconnection (patch cord side)
24 nine-position RJ-45 shielded modular jacks. Use of patch cords with GIRARD Cat.6 RJ-45 plugs is recommended.
Back Interconnection (cabling side)
24 eight-position Krone tool-compatible blocks; accept 22-24 AWG wires and stranded 24-26 AWG. Rated for up to a minimum of 200 re termination cycles.
Note: Termination tools must be ordered separately.
Interconnection to GIRARD's EZ-View system
- EZ-Panels - One 14-pin header on the back of the EZ-Panel is used for connection to the Scanner.
- Select Group B Scanner Attachment Cord according to the required length.
- The scanning signal is transmitted over pin 9 of the RJ-45. Pin 9 exists in nine-position RJ-45 jack and plug designs, used for these EZ-Panel models. A special patch cord �Jumper for EZ-Panel, including an extra wire and special RJ-45 plugs is needed. Please refer to the EZ-View System and the Copper Cables and Cords sections for further details.
Indicators (in models adapted to EZ-View only)
Port identification indicators - 24 red LEDs. A pair of activated LEDs identifies connected ports. A single port can be identified and the corresponding LED activated by a remote control command from the network management station.
General
Physical
Height: 44.2 mm / 1.74" (1U)
Width: 482.6 mm / 19"
Depth: 35.0 mm / 1.375"
Depth with Cable
Retention Fixture: 89.15 mm / 3.5"
Weight: 1.5 Kg
Material
Steel SAE 1020
Colors
Black background with gray silk screened markings
Environment
Temperature:-40� to 85�C
Humidity: 0-90% non-condensing
Compliance with International EMC Standards:
The Cat.6 FTP 24 line of EZ-Panels is designed to comply with EN-55022, Class B (Europe) and FCC Part 15, Subpart J, Class A (USA).
|
