- Patch cords for EZ-Panel are used in cross-connect EZ-View applications
- Comprise a length of nine-wire flexible jumper cable, terminated with two ten-position RJ-45 plugs at the ends
- Conform to ANSI/TIA/EIA-568-B.2, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 5e/Class D
The Cat5E UTP patch cord for EZ-Panel conforms to ANSI/TIA/EIA-568-B.2, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 5e/Class D applications, and is designed for high speed protocols such as ATM 622 Mbps and Gigabit Ethernet 1000 Mbps. The Jumper is comprised of a flexible jumper cable and terminates with two modular plugs.
Cat5E UTP Patch Cord for EZ-Panel
The Cat5E UTP Jumper Cable is a 100 ohm UTP cable. The cable is housed in a blue PVC jacket and includes four twisted pairs. An additional 26 AWG, flexible, insulated conductor at the center of the cable serves as a control wire, which carries the EZ-View scanning signal. In this way, scanning does not interfere with the data signal-carrying pairs.
Cat5E UTP Modular Plug
The Cat5E Modular Plug features enhanced Category-5 performance. Available with 8 contacts, the connectors accommodate termination of 24-26 AWG stranded wires.
Cat5E UTP Patch Cord for EZ-Panel
Construction
- Basic Wires
Conductor: eight wires, stranded bare copper, 7 x 0.20 mm (24 AWG)
Insulation: solid polyolefin, 0.97�0.02 mm diameter
- Control Wire
Conductor: one wire, stranded bare copper, 7 x 0.16 mm (26 AWG)
Insulation: solid polyolefin, 0.83 mm nominal, 0.85 mm max. diameter
- Pair Construction
Four pairs cabled together around the control wire
- Pair Color Codes (2 wires/pair)
Blue/white-blue, orange/white-orange, green/white-green, brown/white-brown
- Overall Diameter
5.5 mm nominal, 6.0 mm max.
- Outer Sheath
Blue RAL 5015, soft PVC compound, with black printing
Electrical
- DC Resistance
Max. 93.8 ohm/km max. at 20�C
- Resistance Unbalance
3% max. at 20�C
- Mutual Capacitance
50 pF/m nominal at 1 KHz
- Capacitance Unbalance
3300 pF/km max. at 1 KHz (wire to ground)
- Impedance
100�15 ohm at 1 to 100 MHz
- Voltage Rating
60 Vrms
- Dielectric Strength
1700 VAC/one minute
- Velocity of Propagation
68% nominal
- Propagation Delay
5.2 nS/m max. @ 1 MHz
5.1 nS/m max. @ 10 MHz
5.1 nS/m max. @ 100 MHz
- Propagation Delay Skew
18 nS/100 m max @ 1-250 MHz
General
- Operating Temperature
0� to 40�C (32� to 104�F)
- Bending Radius (min.)
44 mm
- Flammability Test
IEC 332-1 / UL 1581 VW-1
- Weight
35 kg/km, nominal
Cat5E UTP Modular Plug
Construction
- Plug Housing
PC Resin UL-94V0
- Contacts
High grade copper alloy
- Plating
30 micro inch gold
Electrical
- Current/Voltage Rating
1.5 Amps, 30 VAC / 56 VDC
- Dielectric Withstanding
1000 volts RMS, 1 min. (60Hz)
Insulation Resistance
500 Megaohms
|