- Patch cord for EZ-Panel are used in cross-connect EZ-View applications
- Comprise a length of nine-wire flexible jumper cable, terminated with two ten-position RJ-45 plugs at the ends
- Conform to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E
- 100% tested at the factory
The Cat.6 FTP Jumper conforms to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E and it's designed for high speed protocols such as ATM 622 Mbps and Gigabit Ethernet 1000 Mbps applications. The Cat.6 patch cord is comprised of a flexible jumper cable and terminates with two RJ-45 modular plugs.
Cat.6 FTP Patch Cord for EZ-Panel
Cat.6 FTP Jumper Cable is a 100-ohm, foiled and shielded cable, designed for high data rates. The cable is housed in a blue PVC jacket with a braided shield, and includes four individually foiled twisted pairs. An additional 26 AWG flexible, insulated conductor at the center of the cable serves as a control wire, which carries the EZ-View scanning signal. As a result, scanning does not interfere with the data signal-carrying pairs.
Cat.6 Modular Plugs
The Cat.6 Plug is field-terminatable, with superior cable retention providing enhanced pull-strength and preventing pair deformation. The plug is designed to ensure precision wire placement, providing superior performance.
With GIRARD's Cat.6 Plug ensures high-repeatability Cross-Talk performance, with both factory and field termination.
The connectors have 8 contacts, and accommodate termination of 24 AWG and 26 AWG solid and stranded conductors.
Construction
Basic Wires
Conductor: eight wires, stranded bare copper, 7 x 0.16 mm (26 AWG)
Insulation: foam skin, polyolefin, 0.98�0.02 mm OD.
Control Wire
Conductor: one wire, stranded bare copper, 7 x 0.16 mm (26 AWG)
Insulation: solid polyolefin, 0.78�0.02mm outer diameter, colored red.
Pair Construction
Four pairs, each pair wrapped in polyester-aluminum foil, providing 100% coverage.
Pair Color Codes (2 wires/pair)
Blue/white, orange/white, green/white, brown/white.
Overall Shield
Tinned-copper braid (providing 65% minimum coverage), laid in close contact with a 26 AWG stranded, tin-plated, copper drain wire.
Overall Diameter
6.0�0.2 mm.
Outer Sheath
Blue RAL 5015 soft PVC compound, with black printing.
Electrical
DC Resistance
Max. 145 ohm/km at 20�C.
Resistance Unbalance
2% max. at 20�C.
Mutual Capacitance
43 pF/m nominal at 1 KHz.
Capacitance Unbalance
1500 pF/km max. at 1 KHz (wire to ground).
Impedance
100 �15 ohm at 1 to 250MHz.
Voltage Rating
30 V rms.
Dielectric Strength
700 VAC/one minute min (wire to wire).
Transfer Impedance (Zt) (Shielding Effectiveness)
5 m ohm/m max. at 1-10 MHz.
Velocity of Propagation
77-80% nominal.
Propagation Delay
5.7 nS/m max @ 1 MHz.
5.4 nS/m max @ 10 MHz.
5.3 nS/m max @ 250 MHz.
Propagation Delay Skew
25 nS/100 m max @ 1-300 MHz.
General
Storage Temperature
-�30� to 70�C (�22� to 158�F)
Operating Temperature
-�5� to 50�C (23� to 122�F)
Flammability Test
IEC 332-1 / UL 1581 VW-1
Weight
43kg/km, nominal
Cat.6 Modular Plugs
Construction
Plug Housing
PC Resin UL-94V0
Contacts
High grade copper alloy
Plating
50 micro inch (1.27 micrometer) gold
Electrical
Current/Voltage Rating
1.5 Amps, 30 VAC / 56 VDC
Dielectric Withstanding
1000 volts RMS, 1 min. (60Hz)
Insulation Resistance
500 Megaohms
|
