1. Patch cord for EZ-Panel are used in cross-connect EZ-View applications
   
2. Comprise a length of nine-wire flexible jumper cable, terminated with two ten-position RJ-45 plugs at the ends
3. Conform to ANSI/TIA/EIA-568-B.2-10, ISO/IEC 11801 2.1 edition and CENELEC EN50173 (200x) latest drafts for Category 6A/CLASS EA
4. 100% tested at the factory

The Cat.6A patch cord for EZ-Panel conforms to ANSI/TIA/EIA-568-B.2-10, ISO/IEC 11801 2.1 edition and CENELEC EN50173 (200x) latest drafts for Category 6A/CLASS EA with enhanced transmission properties, supporting 10GBase-T and all other high bandwidth digital applications with low BER up to 500 MHZ bandwidth. Comprised of flexible jumper cable and terminating with two modular plugs.   

Cat.6A FTP patch cord for EZ-Panel
Cat.6A FTP Jumper Cable is a 100 ohm, foiled and shielded cable, designed for high data rates for indoor installations. The cable is housed in a blue LSZH jacket with a braided shield, and includes four individually foiled twisted pairs. An additional 26 AWG flexible, insulated conductor at the center of the cable serves as a control wire, which carries the EZ-View scanning signal. As a result, scanning does not interfere with the data signal-carrying pairs.

Cat.6A Modular Plugs
The Cat.6A Plug is field-terminatable, designed to ensure precision wire placement, with superior cable retention providing enhanced pull-strength and preventing pair deformation. With GIRARD's Cat.6A Plug ensures high-repeatability Cross-Talk performance, with both factory and field termination.

The connectors have 8 contacts, and accommodate termination of 24 AWG and 26 AWG solid and stranded conductors. In addition, there is a 9th contact for Patch View applications which can accommodate the 26 AWG stranded wire.   

Cat.6A FTP Patch Cord for EZ-Panel
Construction

1. Basic Wires
   Conductor: eight wires, stranded bare copper, 7 x 0.16 mm (26 AWG)
   Insulation: foam skin, polyolefin, 0.98�0.02 mm OD.
2. Control Wire
   Conductor: one wire, stranded bare copper, 7 x 0.16 mm (26 AWG)
   Insulation: solid polyolefin, 0.78�0.02mm outer diameter, colored red.
3. Pair Construction
   Four pairs, each pair wrapped in polyester-aluminum foil, providing 100% coverage.
4. Pair Color Codes (2 wires)
   Blue/white, orange/white, green/white, brown/white
5. Overall Shield
   Tinned-copper braid (providing 65% minimum coverage), laid in close contact with a 26 AWG stranded, tin-plated, copper drain wire.
6. Overall Diameter
   6.0�0.2 mm.
7. Outer Sheath
   Blue RAL 5017, soft LSZH compound, with black printing.

Electrical

1. DC Resistance
   Max. 145W/km at 20�C.
2. Resistance Unbalance
   2% max. at 20�C.
3. Mutual Capacitance
   43 pF/m nominal at 1 KHz.
4. Capacitance Unbalance
   1500 pF/km max. at 1 KHz (wire to ground).
5. Impedance
   100 �15W at 1 to 250MHz.
6. Voltage Rating
   30 V rms.
7. Dielectric Strength
   700 VAC/one minute min (wire to wire).
8. Transfer Impedance (Zt) (Shielding Effectiveness)
   5 mW/m max. at 1-30 MHz.
9. Velocity of Propagation
   77-80% nominal.
10. Propagation Delay
    5.0 nS/m max @ 500 MHz.
11. Propagation Delay Skew
    25 nS/100 m max @ 1-500 MHz.
12. Weight
    43kg/km, nominal

Cat.6A FTP Modular Plug
Construction

1. Plug Housing
   PC Resin UL-94V0.
2. Contacts
   High grade copper alloy 
3. Plating
   50 micro inch (1.27 micrometer) gold.

Electrical

1. Current/Voltage Rating
   1.5 Amps, 30 VAC / 42 VDC
   
2. Dielectric Withstanding
   1000 volts RMS, 1 min. (60Hz)
3. Insulation Resistance
   500 Megaohms
4. Termination
   Accomodates termination of 24 AWG solid and/or stranded wires and 26 AWG stranded wires