- Designed for EZ-View applications
- Comprised of two tight buffer fibers and an additional 26 AWG copper wire
- Available with two fiber types � Single-Mode, Multi-Mode 50/125 OM3
- Multi-Mode models are colored Ivory and Single-Mode models
SC Duplex Patch Cords for EZ-Panel with a EZ-View Scanning Wire
The Fiber Optic SMART Jumper is an SC duplex patch cord designed for EZ-View applications. It comprises two tight buffer fibers and an additional 26 AWG copper wire housed within a common flat PVC outer jacket.
Each end is terminated with a high performance hybrid connector comprised of an SC duplex fiber optic connector and a spring loaded electrical contact housed within a common plastic shell. Single mode SMART Jumpers come with PC or APC connectors.
When inserted into a port of a GIRARD fiber optic EZ-Panel with EZ-View capability, both optical and electrical connections are made simultaneously. The copper connection allows the GIRARD EZ-View system to scan all the wiring center's fiber optic connections and report the connectivity results to the network administrator on-line and in real-time.
Multi mode models are colored ivory and single mode models are colored blue.
Construction
Jacket
Constructed of non-reclaimed PVC. The material is flame-retardant and meets the UL-94 V0 flammability requirements. Multi mode cables are colored ivory RAL 1015 and single mode cables are colored blue RAL 5015.
Standards
The series complies with ANSI/TIA/EIA-455 and IEC-794 standards.
Flammability Tests
IEC-811, IEC-332-1, IEC-332-3, ASTM D-2633, UL 1581, UL 94, IEEE 383
Mechanical
Min. bending radius
for installation (*)
long term (*) |
mm
mm
|
30
40
|
Max. Tensile strength
for installation
long term |
N
N
|
550
300
|
Maximum crush resistance |
N/cm |
200 |
Flexing |
Cycle |
10,000 |
Cable dimensions |
mm |
3.9�0.15 x 7.4�0.15 |
Min cable dimensions |
mm |
2.5�0.1 |
Storage temperature range |
oC |
-25 to +75 |
Operating temperature range |
oC |
-25 to +75 |
|