|
GIRARD offers cable supporting bar products to encompass
a wide range of rack sizes and cable routing methods. Supporting
bar provide strain relief anchor points and organization of
horizontal cables being routed to the back of a patch panel.
Provides a direct and smooth routing of the cables to the
patch panel from below. There are cable eyelets for securing
cable ties (included) and cutouts for inserting our hook and
loop cable managers. The designs keep the supporting bar at
an adequate distance from the panel to provide proper space
to route the cables.
|
1. |
The supporting bar can be mounted to the
back side of a 19 inch rack, using the screws for hold
the supporting bar to the patch panel. |
|
2. |
Grounding bar provide an anchor and a grounding point
for shielded (SSTP) or screened (ScTP) cables being routed
to the back of patch panels |
|
