|
Module type shielded panels incorporate Girard PCS exclusive connector and a metal shielded layer with ground cable. Characteristic exceeds TIA/EIA 568-B,2 ISO/IEC-11801 2nd version.
GIRARD offers cable supporting bar products to encompass a wide range of rack sizes and cable routing methods. Supporting bar provide strain relief anchor points and organization of horizontal cables being routed to the back of a patch panel. Provides a direct and smooth routing of the cables to the patch panel from either above or below. There are cable eyelets for securing cable ties (included) and cutouts for inserting our hook and loop cable managers. The designs keep the supporting bar at an adequate distance from the panel to provide proper space to route the cables.
Features:
|
1.
|
The supporting bar can be mounted to the back side of a 19 inch rack, using the screws for hold the supporting bar to the patch panel. |
2.
|
Ground cable provide an anchor and a grounding point for shielded (SSTP) or screened (ScTP) cables being routed to the back of patch panels. |
3.
|
The write-on label can be use with color labels for better management. |
4.
|
High density 1U 16/24 port design for easy assembly.
|
|
